Panasonic AJ-D950 Var, In/Out, Manu, Del, Nega, Flash, Non-Std, Servo, Ext, Edit, Def, RPLCE1

Setup menus

USER menu

<EDIT>

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display				display
300	VAR	0000			– .43~1	This sets the VAR speed range.
	RANGE	0001			– 4~+4	0: The tape is played in slow motion at a speed ranging from
						–0.43×to +1× normal speed.
						1: The tape is played in the ±4.1× normal speed range.
301	IN/OUT	0000			MANU	This selects the operation to be performed when an edit point
	DEL	0001			AUTO	has been set incorrectly (when the OUT point is before the IN
						point).
						0: Editing is not executed unless the illegal edit point is
						cleared or set again properly.
						1: The edit points already input are automatically cleared.
302	NEGA	0000			OFF	This selects whether to show a negative display when the IN
	FLASH	0001			ON	point is greater than the OUT point.
						0: No negative display.
						1: Negative display.
303	STD/	0000			AUTO	This selects STD or NON-STD in accordance with the compo-
	NON-STD	0001			STD	site input signal.
		0002			N-STD	0: Standard/non-standard signals are automatically identified
						and processed.
						1: Standard signals are processed. (Forced STD)
						2: Non-standard signals are processed. (Forced NON-STD)
304	SERVO	0000			AUTO	This selects the video signal processing.
	REF	0001			EXT	0: Servo is synchronized with the input signal during recording
						and editing, or with the REF signal during playback.
						1: Servo is synchronized at all times with the REF signal.
305	EDIT	0000			N-DEF	This sets the channel assignments for the controller’s analog
	RPLCE1	0001			CH1	audio preset when editing the digital audio of the VTR using a
		0002			CH2	controller which does not have a digital audio edit preset
		0003			CH1+2	control function.
						This selects the channel concerned when the VTR CH1 edit
						preset is set in compliance with the ON or OFF presetting for
						the analog audio signals designated by the controller.
						0: Not set.
						1: Compliance with analog CH1 edit preset.
						2: Compliance with analog CH2 edit preset.
						3: Compliance with either analog CH1 ot CH2 edit preset.
306	EDIT	0000			N-DEF	This selects the channel concerned when the VTR CH2 edit
	RPLCE2	0001			CH1	preset is set in compliance with the ON or OFF presetting for
		0002			CH2	the analog audio signals designated by the controller.
		0003			CH1+2	0: Not set.
						1: Compliance with analog CH1 edit preset.
						2: Compliance with analog CH2 edit preset.
						3: Compliance with either analog CH1 ot CH2 edit preset.
307	EDIT	0000			N-DEF	The same type of setting as No. 305. This selects the channel
	RPLCE3	0001			CH1	concerned when the VTR CH3 edit preset is set in compliance
		0002			CH2	with the On or OFF presetting for the analog audio signals
		0003			CH1+CH2	designated by the controller.
						0: Not set.
						1: Compliance with analog CH1 edit preset.
						2: Compliance with analog CH2 edit preset.
						3: Compliance with either analog CH1 or CH2 edit preset.

The underline on the setting item denotes the initial setting.

– 52 –