Panasonic AJ-D950 manual Edit Setting Description

USER menu

<EDIT> (continued)

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display				display
308	EDIT	0000			N-DEF	The same type of setting as No. 305. This selects the channel
	RPLCE4	0001			CH1	concerned when the VTR CH4 edit preset is set in compliance
		0002			CH2	with the ON or OFF presetting for the analog audio signals
		0003			CH1+CH2	designated by the controller.
						0: Not set.
						1: Compliance with analog CH1 edit preset.
						2: Compliance with analog CH2 edit preset.
						3: Compliance with analog CH1 or CH2 edit preset.
309	EDIT	0000			N-DEF	This selects the channel concerned when the VTR CUE edit
	RPLCEC	0001			CH1	preset is set in compliance with the ON or OFF presetting for
		0002			CH2	the analog audio signals designated by the editor or controller.
		0003			CH1+2	0: Not set.
						1: Compliance with analog CH1 edit preset.
						2: Compliance with analog CH2 edit preset.
						3: Compliance with either analog CH1 ot CH2 edit preset.
310	CONFI	0000			OFF	This selects whether to conduct simultaneous playback while
	EDIT	0001			ON	editing is in progress.
						0: No simultaneous playback
						1: Simultaneous playback
						<Note>
						Simultaneous playback is valid when the TAPE/EE switch is
						set to TAPE.
311	AUD EDIT	0000			CUT	This selects the connection method for the digital audio edit IN
	IN	0001			FADE	point.
						0: Cut processing
						1: V Fade processing
312	AUD EDIT	0000			CUT	This selects the connection method for the digital audio edit
	OUT	0001			FADE	OUT point.
						0: Cut processing
						1: V Fade processing
313	AUTO	0000			DIS	This selects whether the IN point is to be entered using the
	ENTRY	0001			ENA	PREROLL button when it has not been entered.
						0: IN point is not entered.
						1: IN point is entered.
314	CF ADJ	0000			PLAYER	This selects the CF adjustment deck with deck-to-deck
	SEL	0001			RECORD	editing.
						0: The player’s edit IN/OUT points are adjusted. (reference as
						the RECORDER side)
						1: The recorder’s edit IN/OUT points are adjusted. (reference
						as the PLAYER side)
315	AFTER	0000			STOP	This selects the mode after cue-up operation is complete.
	CUE-UP	0001			STILL	0: STOP mode
						1: SHTL STILL mode
316	JOG RANGE	0000			–.43~1	This sets the range of the JOG speed during 9P remote
		0001			–4~+4	operation.
						0: Plays at –0.43 to +1 speed range
						1: Plays at the ±4.1 speed range

The underline on the setting item denotes the initial setting.

– 53 –