Panasonic AJ-SD930, AJ-SD955A manual Var Fwd, Var Rev Max, Jog Fwd, Jog Rev Max, Postroll

Setup menus

USER menu			<EDIT>
No./Item			Description
309		The same type of setting as setup menu No.
		305. This selects the channel concerned when
EDIT RPLCEC		the CUE edit preset is set in compliance with
		the ON or OFF presetting for the analog audio
		signals designated by the controller.
		0000	N-DEF :
		Not set.
		0001	CH1 :
		Compliance with analog CH1 edit preset.
		0002	CH2 :
		Compliance with analog CH2 edit preset.
		0003	CH1+2 :
		Compliance with either analog CH1 or CH2
		edit preset.
310		This selects whether to conduct simultaneous
		playback while editing is in progress.
CONFI EDIT
		0000	OFF : No simultaneous playback
		0001	ON : Simultaneous playback
		<Note>
		Simultaneous playback is valid when the MODE
		switch is set to TAPE.
311		This selects the connection method for the
		digital audio edit IN point.
AUD EDIT IN
		0000	CUT : Cut processing
		0001	FADE : V Fade processing
312		This selects the connection method for the
		digital audio edit OUT point.
AUD EDIT
OUT		0000	CUT : Cut processing
		0001	FADE : V Fade processing
313		This selects whether the IN point is to be
	SD955A
		entered using the PREROLL button when it
AUTO ENTRY		has not been entered.
		0000	DIS : IN point is not entered.
		0001	ENA : IN point is entered.
314		This selects the CF adjustment deck with
	SD955A
		deck-to-deck editing.
CF ADJ SEL
		0000 PLAYER :
		The player’s edit IN/OUT points are adjusted.
		(reference as the RECORDER side)
		0001 RECORD :
		The recorder’s edit IN/OUT points are
		adjusted. (reference as the PLAYER side)
315		This selects the mode after cue-up operation
		is complete.
AFTER
CUE-UP		0000	STOP : STOP mode
		0001	STILL : SHTL STILL mode
		0002	STILL2 : SLOW STILL mode

The underlined items indicates the initial setting.

No./Item					Description
320		This sets the maximum SLOW FWD speed.
VAR FWD		0000	+4.1	: +4.1 (+3.1)a speed
MAX		0001	+1.85	: +1.85a speed
		0002	+1	: +1a speed
		<Notes>
		OThe value for the DV/DVCAM tape is shown in
		parenthesis (			).
		OAt any speed setting other than +4.1, the
		phase cannot be synchronized from the editing
		controller.
321		This sets the maximum SLOW REV speed.
VAR REV MAX		0000	–4.1 :–4.1 (–3.1)aspeed
		0001	–1.85 :–1.85aspeed
		0002	–1 :–1aspeed
		0003	–0.43 :–0.43aspeed
		<Note>
		The value for the DV/DVCAM tape is shown in
		parenthesis (			).
323		This sets the maximum JOG FWD speed.
JOG FWD		0000	+4.1	: +4.1 (+3.1)a speed
MAX		0001	+1.85	: +1.85a speed
		0002	+1	: +1a speed
		<Notes>
		OThe value for the DV/DVCAM tape is shown in
		parenthesis (			).
		OThe maximum speed is set to +1a when the
		dial on the front panel is operated.
		OAt any speed setting other than +4.1, the
		phase cannot be synchronized from an editing
		controller which synchronizes the phase using
		the JOG command.
324		This sets the maximum JOG REV speed.
JOG REV MAX		0000	–4.1 :–4.1 (–3.1)aspeed
		0001	–1.85 :–1.85aspeed
		0002	–1 :–1aspeed
		0003	–0.43 :–0.43 (–0.5)aspeed
		<Notes>
		OThe value for the DV/DVCAM tape is shown in
		parenthesis (			).
		OThe maximum speed is set to –1awhen the
		dial on the front panel is operated.
325		This sets the postroll time.
	SD955A
		Any time from 0 to 5 seconds can be set in 1-
POSTROLL		second units.
TM
		0000	0s
		0001	1s
		0002	2s
		0003	3s
		0004	4s
		0005	5s

41