Troubleshooting
Starting up
| Power does not come on. | • Make sure the camera head option cable is connected properly. |
| Refer to the connections on page |
| Unusual sound is heard. | • Some operating sounds may be evident when powering on, switching |
| operation modes and zooming. Sounds in such cases do not necessarily |
| indicate a problem. |
Shooting
| Cannot start shooting. | • Make sure the recorder’s operation mode is CAM mode. | |
| With the recorder’s power off, connect the camera head option cable correctly, | |
| and turn on the power. (Page | |
| The CAM mode will not be established even when the camera head option | |
| cable is connected while the recorder’s power is on. | |
| Cannot focus automatically. | • Make sure the camera is in auto focus mode, where you can focus automatically. | |
| • You may be shooting a scene where it is difficult to bring the subject into focus | |
| in the auto focus mode. If this is the case, focus in the manual focus mode. | |
| It may be hard to bring the subject into focus when: | |
| · | both close and distant objects are to be shot |
| · | shooting through a dirty window |
| · | shooting in a dark place |
| · | there are sparkling or shiny objects around the subject |
| · | the subject is moving fast |
| · | shooting a scene with minimal contrast |
| Video is distorted or not | • Make sure the connection has been made to the recorder correctly. (Page | |
| recorded. | • Make sure the connection has been made to the recorder using the camera | |
| head option cable. (Page | |