Panasonic AW-PB309P manual Passwords, Types of passwords, http//192.168.1.50/config/config.html

Passwords

Three kinds of passwords can be set for the WEB card so that three levels of access restriction can be established.

1)Monitor password

2)Operation password

3)Management password

Types of passwords

Each password serves to restrict the kinds of operations that a user can perform. In terms of their functions, the management password has the highest level of authority. It is followed by the operation password and then by the monitor password which has the lowest level of authority.

When one of the lower-level passwords has been set, set the higher-level password or passwords as shown in the table below. If, for instance, only the operation password has been set, it means that no restrictions will be placed on access by a user to the Config screen whose level is higher, and so the management password should also be set along with the operation password.

	Lower order			Higher order
	Monitor	Operation	Management
	password	password		password
To place restrictions on access to	Set this password	Set this password	Set this password
images
To place restrictions on image quality,	–	Set this password	Set this password
size, pan-tilt head and camera control
To place restrictions on access to the	–	–	Set this password
Config screen

Setting the passwords

The passwords are set on the Config screen.

1.Start up the browser.

2. Input the following address into the browser.

http://(new IP address setting)/config/config.html

The following address is used in the factory setting status:

http://192.168.1.50/config/config.html

3.The password setting screen now appears.

Concerning the characters used to set the passwords

The following characters can be used for the passwords.

•Letters of the alphabet (differentiation is made between upper case and lower case)

•Numerals

•All ASCII symbols except &, ?,% and "

Input up to 15 characters for each password.

12