Panasonic AW-PB309P manual Installation Ask your dealer to install the card in the camera

Installation Ask your dealer to install the card in the camera.

Bear in mind the following points when installing the card.

≥Be absolutely sure to ask your dealer to install the card.

≥Before installing the card, disconnect the camera’s power supply.

≥Before handling the card, touch a metal part of the camera to release any static stored in the body.

Wearing anti-static wrist straps is even safer.

Touching the card without first releasing this static may cause malfunctioning.

≥Do not allow the metal parts of the card come in contact with any other metal parts.

1.Turn the power to the camera off and remove the power connector and other cables from the camera.

2.Loosen the 4 screws on the rear panel of the camera, then remove the panel itself.

3.Loosen the 2 screws on the optional card slot cover, then remove the cover.

4.Align the WEB card with the guide rail at the bottom of the camera and tab at the top, and insert it. Slide it all the way in securely.

5.Secure the card using the 2 screws.

If the screws have been lost or misplaced, use the accessory screws (6 mm long) instead.

6.Firmly secure the rear panel with the 4 screws.

If the screws have been lost or misplaced, use the accessory screws (8 mm long) instead.

7.Connect the necessary cables, then plug in the power connector and turn on the power.

Rear panel

			VIDEO		OUT
	OPTIO	N CARD		I/F REM		OTE
MENU			G/L IN
ITEM/	AWC
			IRIS
YES/ABC
NO/BAR			DC12V	IN

Optional card slot cover

RST	RDY
LINK/R	X					VIDEO		OUT
					N CARD
							I/F REMOTE
				OPTIO
–TSEBA10
		MENU				G/L IN
C23S2R			WC			IRIS
		ITEM/A
		YES/A		BC
		NO	/BAR				IN
						DC12V
WEB card
Screws (6 mm)						Screws
						(8 mm)

5