System upgrading
[1] Connections
An example of the basic connections is presented below.
Install the WEB card
O I
AC adapter
HUB
Windows PC | Windows PC |
[2]Recommended system requirements
1) Personal computer
Provide a
•Pentium III : 500 MHz or higher
•Memory size: 64MB or more
•Network interface card
2)Operating system
Provide any of the following versions of Windows:
•Windows 98
•Windows ME
•Windows 2000
3)Browser software
Provide one of the following browsers in the versions specified:
•Internet Explorer 5.5
•Netscape 4.7
<Notes>
≥An adequate picture tracing performance will not be achieved if the PC’s performance is too low.
≥It may not be possible to achieve the prescribed performance or operation may become
unstable when a Windows or browser version other than the ones recommended is used.
≥Do not simultaneously install other application software (such as a word processing or spreadsheet program) in addition to the browser. Doing so may cause operation to become unstable.
•Pentium is a registered trademark of Intel Corporation.
•Windows, Windows 98, Windows ME, Windows 2000 and Internet Explorer are registered trademarks of Microsoft Corporation.
•Netscape is a registered trademark of Netscape Communication.
•Other company names or product names provided on this product are the trademarks or registered trademarks of the companies concerned.
[3] Installation and settings at the PC end
1.Install one of the recommended versions of Windows in the PC. Follow the instructions provided with the Windows version concerned.
2.Install one of the recommended browsers by following the instructions provided with the software concerned.
3.First, set the IP address of the WEB card. Set the IP address at the PC end as described on the following page in order to make the connection with the PC in the WEB card’s initial setting status.
6
