Panasonic AW-PH405N Specifications, Supply voltage, AC 120 V, 60 Hz, Power consumption, 120 W

Specifications

Supply voltage:	AC 120 V, 60 Hz
Power consumption:	120 W

indicates safety information.

Genlock input:	BNC
	Black burst or composite video signal, Tri Sync
Prompter input
(PROMPTER IN):	BNC
	Through output to PROMPTER connector
Prompter output
(PROMPTER OUT):	D-SUB 15-pin
Camera video output
VIDEO:	BNC, 75-ohm output
Y:	BNC, 75-ohm output
Pr/C:	BNC, 75-ohm output
Pb:	BNC, 75-ohm output
SDI:	BNC
AUX:	BNC
Camera, pan-tilt head control:	RJ45, RS-422, pan-tilt head control signal output
RP	Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),
	max. 3281 ft (1000 meters)
Functions/performance:	Maximum weight capacity: 33.1 lbs (15 kg)
	Tilt range: 300 degrees (approx. ±150 degrees)
	The tilt range is subject to restrictions depending on the cable and lens of camera to be
	mounted on pan-tilt head.
	Pan range: 300 degrees (approx. ±150 degrees)
	Maximum operating speed: 45 degrees/sec.
	(when the center of gravity of the units installed on the pan-tilt head has been aligned with
	the head’s center of rotation)
	(Maximum operating speed with prompter mounted: 15 degrees/sec.)
	Stop accuracy: ±3´
	Noise level: Less than NC35 (at less than 30 degrees/sec.)
Ambient operating temperature: 23°F to 113°F (–5°C to +45°C)
Storage temperature:	–4°F to 149°F (–20°C to +65°C)
Ambient operating humidity:	30% to 90% (no condensation)
Dimensions (WHD):	12-9/16”16-3/8”6-5/8” (319416168 mm)
Weight:	Approx. 22 lbs (10 kg)
Finish:	AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)

Weight and Dimensions indicated above are approximate.

Specifications are subject to change without notice.

29