6

Basic shooting operations

1 Set the subject brightness to the appropriate
level.
2 Turn on the power of all the units and devices
in the system.
3 Select the unit to be operated.
Even when using only one unit, it must still be selected
from the wireless remote control or controller.
4 Select the shooting mode.
One of four shooting modes (Scene1, Scene2, Scene3
or Scene4) — whichever one will best suit the shooting
conditions — can be selected.
The shooting modes are set by the user.
For details of the factory settings, refer to pages 53 to 54.
Select the mode that satisfies the shooting conditions
and suits your preferences.
When continuing to shoot in the same circumstances,
there is no need to select another mode.
5 Start shooting.
(After shooting, turn off the power of all the
units and devices in the system.)
Some of the initial settings are auto settings and
cannot be operated manually. To perform manual
operations for these settings, switch the auto
settings to manual settings as necessary.
Note
If the settings have already been changed and the original
settings are to be restored, refer to the “What to do when
encountering problems in the basic shooting operations”
(page 13) and “Camera screen” (page 38) in
“Setting the camera menu items”.