74
Web setting screen (continued)
Tally Enable [Disable, Enable]
“Enable” or “Disable” is set here for the function which
turns on or turns off the tally lamp using the tally control
signal.
OSD Mix
Whether the camera menus, statuses and other displays
are to be turned Off or On can be selected here for each
output picture.
SDI Out [Off, On]
HDMI Out [Off, On]
Component Out [Off, On]
Video Out [Off, On]
When “On” is set, the camera menus and statuses are
displayed on the output picture targeted by the setting
items listed above.
OSD Off With Tally [Off, On]
This is used to enable or disable the function for clearing
the camera menu and status displays when the tally signal
is received by a command or contact.
When the tally signal is released, the original camera
menu displays are restored.
OSD Status [Off, On]
“On” or “Off” is set here for the status display which
appears during AWB operations.