Panasonic Other, Install Position [Desktop, Hanging], Smart Picture Flip [Off, Auto], Flip Detect Angle [60 to 120], Preset Speed [1 to 30], Preset Scope [Mode A, Mode B, Mode C], Speed With Zoom POS. [Off, On], Focus Mode [Auto, Manual], Focus ADJ With PTZ. [Off, On], Digital Zoom [Disable, Enable], Max Digital Zoom [x2, x3, x4, x5, x6, x7, x8, x9, x10]

73
Web setting
Web setting screen (continued)
 Other
This item’s setting is reflected when the Set button is
pressed.
Install Position [Desktop, Hanging]
“Desktop” or “Hanging” is selected here as the method
used to install the unit.
Desktop Stand-alone installation
Hanging Suspended installation
 When “Hanging” has been selected, the top, bottom,
left and right of the images will be reversed, and
up/down/left/right control for panning and tilting will also
be reversed.
Smart Picture Flip [Off, Auto]
If, when “Auto” has been set, tilt is set to the angle
selected using “Flip Detect Angle”, the picture is
automatically turned upside down (flipped).
Flip Detect Angle [60° to 120°]
When “Auto” has been selected as the “Smart Picture Flip”
setting, the tilt angle at which the picture is to be turned
upside down (flipped) can be set here.
Preset Speed [1 to 30]
There are 30 preset pan-tilt operation speeds when
regenerating the camera direction and other information
which are registered in the preset memory.
 If a high value is selected for the Preset Speed
setting, the image on the screen may shake when
operation stops.
 When connecting the unit to the AW-RP655 for use,
the “DIAGONAL SPEED (P/T SETTING)” setting of
the AW-RP655 takes effect.
To change the Preset Speed, change the
AW-RP655 setting.
Notes
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when
the contents of the preset memory are regenerated.
Mode A Pan, Tilt, Zoom (including digital zoom),
Focus, Iris, Gain, white balance adjustment
value
Mode B Pan, Tilt, Zoom (including digital zoom),
Focus, Iris
Mode C Pan, Tilt, Zoom (including digital zoom), Focus
Speed With Zoom POS. [Off, On]
“Off” or “On” is set here for the function used to adjust the
pan-tilt adjustment speed in conjunction with the zoom
magnification.
When “On” is set, the panning and tilting operations will
become slower in the zoom status.
This function has no effect during preset operations.
Focus Mode [Auto, Manual]
“Auto” or “Manual” is set here for the focusing function.
Auto The subjects are always brought into focus
automatically.
Manual The focus is operated manually.
Focus ADJ With PTZ. [Off, On]
“Off” or “On” is set here for the function which
compensates for out-of-focusing when it occurs during
panning, tilting or zooming operations.
When “Off” is set, adjust the focus as required after
zooming or set the focus to the auto mode.
This item can be selected only when “Manual” has been
selected as the “Focus Mode” setting.
Digital Zoom [Disable, Enable]
“Enable” or “Disable” is set here for the digital zoom
function.
If zooming is performed toward the Tele end beyond the
maximum position when “Enable” has been selected, the
digital zoom can be operated continuously. Zooming will
stop temporarily at the position where the optical zoom
and digital zoom are switched so after it has stopped at
this position, proceed with zooming again.
When the setting is changed to “Disable” while already in
the digital zoom region, the zoom will automatically move
to the maximum position of the optical zoom.
 When DRS is enabled, the digital zoom is disabled.
 The digital zoom is set to off when color bars are
displayed during digital zooming.
Notes
Max Digital Zoom
[x2, x3, x4, x5, x6, x7, x8, x9, x10]
The upper limit for the digital zoom magnification is set
here.