Panasonic AW-SW350P manual Installing the Application Program, Device manager screen

6 In order to confirm that the device driver has been installed successfully, it is recommended that you open the Device manager as shown in Fig.5, and check that “AW-SW USB Device:AW-SW350” is displayed.

Fig.5 Device manager screen

■INSTALLING THE APPLICATION PROGRAM

This section describes how to install the application program used with the USB image transfer program for the AW-SW350. In the example of the procedure given below, Windows XP is used as the operating system.

1 Insert the CD-ROM supplied with the AW-SW350 in the CD-ROM drive of the host computer. (In this example, E: is the drive used.)

2 Run the “Microsoft .Net Framework” setup file (E:\JPN\DOTNETFX.EXE).

3 The installer program shown in Fig.6 now starts. Proceed with the installation by following the installer instructions.

Fig.6 Microsoft .Net Framework installer start screen

4 Run the setup program (E:\JPN\SETUP.EXE).

24 25