Panasonic BDP-140, BDP-440, BDP-LX55 Use, Use, Note, Note, ENTER, ENTER, ENTER, ENTER, RETURN, Screen, Screen, Not use, IP Address, Next Screen, Server Name, 2Set IP address

07 Adjusting the video1Select and set Display Setting  Video Adjust Next Screen.

Use / to select, then press ENTER.

2Select the item and change the setting.

Use /to select the item, then use /to change the setting. Once the setting is completed, press

RETURN to close the settings screen.

List of BDP-LX55 setting items

Item	Description
Prog.Motion	Adjust according to the type of image
	(moving or still image). This is effective
	mainly when outputting video materials
	as progressive images.

Pure Cinema	This setting optimizes the operation of
	the progressive scanning circuit for
	playing film materials.

Black level	Adjusts the level of the black portions.

White level	Adjusts the level of the white portions.

Hue	Adjusts the balance between green and
	red.

Chroma Level	Adjusts the density of the colors.

Detail	Adjusts the picture’s contours.

YNR	Reduces noise in the luminance (Y)
	signal.

CNR	Reduces noise in the chroma (C) signal.

MNR	Reduces the mosquito noise (distortion
	along the contours of the picture
	generated upon MPEG compression).

BNR	Reduces the block noise (block-shaped
	distortion generated upon MPEG
	compression).

List of BDP-440/BDP-140 setting items

Item	Description
Brightness	Select this to adjust the TV screen’s
	brightness.

Contrast	Select this to adjust the TV screen’s
	contrast.

Hue	Select this to adjust the color (green and
	red) balance of the TV screen.

Saturation	Select this to adjust the TV screen’s
	saturation.

Setting the IP address1Select and set Network  IP setting  NextScreen.

Use / to select, then press ENTER.

2Set IP address.

Use ///to set the IP address of the player or DNS server, then press ENTER.

•Auto Set IP Address

On – The player’s IP address is obtained automatically. Select this when using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. This player’s IP address will automatically be allocated from the DHCP server.

Off – The player’s IP address must be set manually. Use the number buttons (0 to 9) to input the IP address, subnet mask and default gateway.

Note

•For information on the DHCP server function, refer to the operating instructions for the network device.

•You may need to contact your Internet service provider or network administrator when inputting the IP address manually.

Setting the proxy server

Only set the proxy server if so instructed by your Internet service provider.

1Select and set Network  Proxy Server  Next

Screen.

Use / to select, then press ENTER.

2Select and set Use or Not use at Proxy Server.

Use / to change, then press .

•Use – Select this when using a proxy server.

•Not use – Select this when not using a proxy server. If you have selected Use, proceed to step 3.

3Select and set Server Select Method.

Use / to change, then press .

•IP Address – Input the IP address.

•Server Name – Input the server name.

Note

•For the BDP-LX55, the Video Adjust settings do not affect Blu-ray 3D pictures or the pictures of the

VIDEO OUTPUT terminals.