5Select and set Start.

Press ENTER.

6Downloading of the software start.

The software download status is displayed on the screen.

•Depending on the Internet connection conditions, software downloading may take a certain period of time.

7Updating starts.

•Software updating may take a certain period of time.

8Updating completes.

This unit automatically restarts.

Updating using a USB memory device/disc

Note

•When an update file is provided on the Pioneer website, use your computer to download it onto a USB memory device or disc. Carefully read the instructions on downloading update files provided on the Pioneer website.

•Store the update file in the root directory of the USB memory device or disc. Do not store it within a folder.

•Do not put any files other than the update file on the USB memory device or disc.

•To update using a disc, use a CD-R or CD-RW disc.

•The player supports USB memory devices formatted in FAT32/16. When formatting a USB memory device on your computer, do so with the settings below.

–File system: FAT32

–Allocation unit size: Default allocation size

•Only store the most recent update file on the USB memory device or disc.

•Do not use a USB extension cable to connect a USB memory device to the player. Using a USB extension cable may prevent the player from performing correctly.

•Steps 1 to 5 are the operations performed by the user.

•Steps 6 to 7 are the operations performed (automatically) by the player (they are intended to update the software).

1Plug in the USB memory device or load the disc on which the update file is stored.

2When playback is stopped, display the Home Menu screen.

Press HOME MENU.

3 Select and set Initial Setup.

Use / to select, then press ENTER.

4Select and set Options Update Disc or USB Storage Start.

Use / to select, then press ENTER.

5Select and set Yes.

Use /// to select Yes, then press ENTER.

6Updating starts.

•Software updating may take a certain period of time.

7Updating completes.

Restoring all the settings to the factory default settings

1Check that the player’s power is turned on.

2When playback is stopped, display the Home Menu screen.

Press HOME MENU.

3 Select and set Initial Setup.

Use / to select, then press ENTER.

4Select and set Options Load Default Next

Screen.

Use / to select, then press ENTER.

5Select and set OK.

Use / to select, then press ENTER.

Note

•After restoring all the settings to the factory default settings, use Setup Navigator to reset the player (page 23).

•When all the settings are restored to the factory defaults, all the data for the secondary video (Picture- in-Picture), secondary audio, bookmarks, etc., is erased.

07

47

En