RECOGNITION PROCEDURES
There is two ways of identification:
•Iris recognition
•
Note: When “READY” is blinking, recognition will be unavailable. Wait until the indicator is on, not blinking.
■Iris Recognition
The procedures are as follows.
1.Stand in front of the unit and turn your face to the center front panel.
Stop at the point you can see the two guidance indica- tors simultaneously, and then turn your face to the unit.
Guidance indicators
ACCEPT
REJECT
READY
3. Status indicator q will light up.
The indicator lights up.
q
ACCEPT 
REJECT
READY 
Note: Depending on the distance between you and the unit, status indicators will blink as shown in Figure 1 or 2. When the indicators show Figure 1 status, come closer to the unit. When the indicators show Figure 2 status, go farther from the unit.
(Figure 1) | (Figure 2) |
Blinking
| Blinking |
The distance is too long. | The distance is too short. |
2.The guidance indicators will automatically light up, and iris recognition will start. Then, the buzzer will beep briefly.
Light up
ACCEPT 
REJECT 
READY 
4.The status indicators will light up in the order shown in the figure.
When all indicators have lighten up, the recognition will be finished.
q |
Light up |
one by |
one |
ACCEPT 
REJECT 
READY 
5.When recognition has been successfully executed, ACCEPT will light up and the buzzer will beep.
When recognition has not been successfully executed (or you have not been enrolled to the unit), REJECT will light up and the buzzer will beep.
ACCEPT 
Lights
REJECT 
up
READY
ACCEPT 
REJECT 
READY 
16
