Panasonic BT-LH900E manual Supplying the power, Using the Anton Bauer battery pack, Reference

Supplying the power

An Anton Bauer, V-mount or other such type of battery pack or an AC power source can be used to power this monitor.

Using the Anton Bauer battery pack

1 Install the Anton Bauer type of battery pack.

Battery pack

2 Insert the battery pack and slide it in the direction of the arrow.

Release lever

<Reference>

To remove the battery pack, slide it in the opposite direction to the one in which it was attached while keeping the release lever on the battery holder pulled down all the way.

Using a V-mount battery pack

1 Remove the battery holder.

Battery holder

2 Install the accessory metal battery mount.

Metal battery mount

3 Secure the V-mount adapter using the four screws, and

then secure the two screws of the connector section.

This connector is not used.

V-mount adapter

9