How to use the
¥PICTURE menu
The menu items shown below appear when the PICTURE menu is selected on the main menu.
[PICTURE MENU] |
|
MODE | BROADCAST |
CONTRAST | 60 |
BRIGHT | 30 |
CHROMA | 30 |
PHASE | 30 |
SHARPNESS | 30 |
AI | OFF |
NR | OFF |
COLOR TEMP | D93 |
3D Y/C | OFF |
[LORD FACTORY] |
|
PHASE
The phase can be adjusted here.
Use the
SHARPNESS
The appropriate sharpness in line with the signal characteristics can be set here.
MODE
The video mode is selected here.
≥BROADCAST
This mode is set at the factory to best suit broadcast operations.
≥GENERAL
This mode applies the dynamic settings which were set at the factory for generally receiving images.
≥USER
This mode enables the mode set by the user to be established. BROADCAST is the factory setting.
AI
Dynamic images can be received when this is set to ON.
NR
This is set to ON when the
COLOR TMP
The color temperature can be adjusted here.
The color temperature is adjusted to comply with the D65 and D93 standards at the factory.
For consumer products, the color temperature is normally set higher.
CONTRAST
The contrast can be adjusted here in line with the conditions of the indoor work environment.
BRIGHT
3D Y/C
This is for the
The picture quality is different when the function is ON and when it is OFF.
The black level can be adjusted here.
CHROMA
The chroma level can be adjusted here.
Use the
<Notes>
LOAD FACTORY
This is selected when the factory settings are to be restored.
When any changes are made to the settings on this menu, the changes also take effect for the settings of other linked video signals for some of the video signals which have been selected. How the changes are linked is explained below.
≥Any changes made to the settings when the LINE A signal has been selected will also be made to the LINE B signal. Conversely, any changes made to the settings when the LINE B signal has been selected will also be made to the LINE A signal.
≥When the optional SDI input unit
8