How to use the
¥VIDEO CONFIG menu
The menu items shown below appear when the VIDEO CONFIG menu is selected on the main menu.
[VIDEO CONFIG]
ASPECT16:9
COMPONENT LEVEL SMPTE
ASPECT
An aspect ratio of 4:3 or 16:9 can be set.
The underscanning function cannot be used when 16:9 has been selected.
COMPONENT LEVEL
The component input level is selected here. This menu item appears only when the component signal has been selected as the input signal.
≥ SMPTE
Select this when signals from a DVD or M II VTR are supplied.
≥ B75
Select this when signals with a 7.5% setup level are supplied from a Betacam VTR.
¥SYSTEM CONFIG menu
The menu items shown below appear when the SYSTEM CONFIG menu is selected on the main menu.
[SYSTEM CONFIG] |
|
BACKLIGHT | 60 |
STATUS DISPLAY CONTINUE | |
[INPUT SELECT] |
|
LINE B | ON |
CMPNT | ON |
SDI | ON |
REMOTE | OFF |
INPUT SELECT
LINE B
By setting this item to OFF, LINE B can be skipped.
CMPNT
By setting this item to OFF, CMPNT can be skipped.
SDI
By setting this item to OFF, SDI can be skipped. This item is valid only when the optional SDI input unit (BT- YA210G) is installed.
BACKLIGHT
The backlight brightness is adjusted to a value from 0 to 60 here. 60 is the factory setting.
STATUS DISPLAY
The information displays during input switching and input signal system display are set here.
≥CONTINUE
The information remains displayed. This is the factory setting.
≥3 SEC OFF
The information is displayed for 3 seconds, after which it is cleared from the display.
≥OFF
No information is displayed.
REMOTE
External control is set to ON or OFF here.
9