12

Turn on the computer, and press

F2

several times while [Panasonic] boot screen is dis-

 

played.

 

The Setup Utility starts up.

 

If the password is requested, enter the Supervisor Password.

13

Press

 

.

 

 

 

 

F9

 

At the confirmation message, select [Yes] and then press

 

.

 

 

 

Enter

 

The Setup Utility settings excluding the password(s) will return to the default values.

14

Select the [Exit] menu and then select [Save Current Values], then press

 

.

Enter

 

At the confirmation message, select [Yes] and press Enter.

15

Turn the computer off by using the power switch.

 

If additional instructions are included with the computer, be sure to read them. It may be necessary to per-

 

form additional operations during the following procedure.

16

Perform the first-time operation ( page 13).

17

Start the Setup Utility and change the settings as necessary.

To change the drive letter of hard disk or CD/DVD drive

NOTE

Drive letters can be changed only when two or more partitions have been created on the hard disk drive. The name of the C: drive cannot be changed.

Change the drive letters before installing applications.

AClick [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools], and double-click [Com- puter Management].

BClick [Disk Management] from [Storage].

CRight-click the hard disk partition or the CD/DVD drive name, and click [Change Drive Letter and Paths...]. DClick [Change...].

EClick [Assign the following drive letter] and the new drive letter, and then click [OK]. At the confirmation message, click [Yes].

Useful Information

23

Page 23
Image 23
Panasonic CF-30 appendix Press, Turn the computer off by using the power switch, Perform the first-time operation