25
Getting StartedUseful InformationTroubleshootingAppendix
During Simultaneous dis-
play, one of the screens
becomes disordered.
zWhen using the Extended Desktop, use the same display colors for the external display
as those used by the LCD.
zIf you continue to experience problems, try changing the display by clicking [start] - [Con-
trol Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile] - [Display
Devices]
zWhen the [Command Prompt] is set to “Full Screen” by pressing
Alt
+
Enter
, the pic-
ture is displayed on one of the screens only. When the window display is restored by
pressing
Alt
+
Enter
, the picture is displayed on both screens.
zSimultaneous display cannot be used until Windows startup is complete (during Setup
Utility, etc.).
The external display does
not work normally.
zIf the external display does not support the power saving function, it may not work nor-
mally when the computer enters the power saving mode. Turn off the external display.
Touch Pad / Touchscreen (only for model with touchscreen)
The cursor does not work. zWhen using the external mouse, connect it correctly.
zRestart the computer using the keyboard.
(Press ,
U
, and
R
to select [Restart].)
zIf the computer does not respond to keyboard commands, read “No response”
(Îbelow).
Cannot input using the
touch pad.
zSet [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.
zThe drivers for some mice may disable the touch pad. Check your mouse’s operating
instructions.
Cannot input using the
touchscreen.
zWhen mouse drivers are installed (i.e. IntelliMouse), the touchscreen does not work.
Reinstall the touchscreen driver.
Cannot point the correct posi-
tion using the included stylus.
zPerform the touchscreen calibration (Îpage 12).
Reference Manual
The Reference Manual is not
displayed.
zInstall Adobe Reader.
ALog on to Windows as an administrator.
BClick [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click [OK].
CFollow the on-screen instructions.
Reinstalling B’s Recorder/B’s CLiP
A serial number is
requested when reinstalling.
zInput the following serial number
B’s Recorder:
B’s CLiP:
Others
No response. zPress
Ctrl
+
Shift
+
Esc
to open Task Manager and close the software application that
is not responding.
zAn input screen (e.g., password input screen at startup) may be hidden behind another
window. Press
Alt
+
Tab
to check.
zPress the power button for four seconds or longer to shut down the computer, and then
press the power button to turn it on. If the application program does not work normally,
uninstall and reinstall the program. To uninstall, click [start] - [Control Panel] - [Add or
Remove Programs].
Display
CF-74MK2_X_E_OI_XA.book 25 ページ ２００６年９月１１日 月曜日 午前９時１８分