Panasonic CF-F8 manual Intel Active Management Technology Intel AMT, Resetting AMT configuration

Intel® Active Management Technology (Intel® AMT)

Appendix Troubleshooting Useful Information Getting Started

Installing the driver

1 Click [start] - [Run] and input “c:\util\drivers\amt\MEI\setup.exe”, then click [OK].

Follow the on-screen instructions.

2 If [SOL/IDE-R] is set to [Enabled] in the INTEL(R) AMT CONFIGURATION, click [start] - [Run] and input “c:\util\drivers\amt\LMS_SOL\setup.exe”, then click [OK].

Follow the on-screen instructions.

Resetting AMT configuration

1 Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

zIf the password is requested, enter the Supervisor Password.

2If the Supervisor Password is not set, select the [Security] menu, then set Supervisor Password.

3Select the [Security] menu, and select [AMT Configuration], and press Enter.

4Select [Intel(R) AMT] and press Enter.

5Select [Disabled] and press Enter.

6Press Esc.

7Select the [Exit] menu, and select [Save Current Values], and press Enter.

At the confirmation message, select [Yes] and press Enter.

8Select the [Security] menu, and select [AMT Configuration], and press Enter.

9Select [Reset AMT Configuration] and press Enter.

At the confirmation message, select [Yes] and press Enter.

The computer will restart.

zIf the password is requested, enter the Supervisor Password.

10 Press Y when the “Continue with unconfiguration” message will appear.

24