Panasonic CF-T2 4, 3

The power saving function is factory set, so if there is no input from a key, the touch pad

or an external mouse (when one is connected) for a certain interval of time, the power

to the LCD and hard disk may be turned off. The LCD will resume operation when the

touch pad or an external mouse (when one is connected) is used or a key is pressed.

The power to the LCD may be turned off even when an application software is being

installed. In this case, because it is conceivable that a selection dialog box will be

shown, do not press Space or Enter to attempt to resume from this condition

as doing so may trigger a selection, but instead, press a key unrelated to the direct

triggering of a selection, like Ctrl .

In addition, when the computer is left alone, it automatically enters the standby or

hibernation mode ( “Standby/Hibernation Functions”). The computer

will resume by sliding the power switch.

You may hear a mechanical “click” shortly after the hard disk indicator has turned

off when there has been no input from a key or device operation, when the computer

enters the standby or hibernation mode, or when Windows is shut down. This is the

sound of the head shifting positions, to reduce power consumption or to protect the

hard disk from shocks. This sound does not indicate a malfunction.

Windows XP

When switching to a different user with the Fast User Switching function, it may

not be possible to set the settings of the display. In this case, log off all logged in

users, and try the operation once more. If the problem persists, restart the computer.

NOTE

4Select your application.

You are able to start working on your computer.

3Log on to Windows.

Windows XP

After confirming that the hard disk drive indicator ( ) has turned off, select the

user and input the password, then select . Until the correct password is entered, the

computer will not operate.

Windows 2000

After confirming that the hard disk drive indicator ( ) has turned off, input the user

name and password, then select [OK]. Until the correct user name and password are

entered, the computer will not operate.