106
Loupe Utility
You can magnify the specific part of the screen.
1Click [start] - [All Programs] - [Panasonic] - [Loupe Utility].
2Click [OK].
z appears on the notification area.
1Point the cursor at the part of the screen you want to magnify.
2Press and hold
Alt
, and right-click.
zThe part pointed by the cursor is magnified.
zAlternatively you can double-click , or right-click and click [Show Loupe].
3Drag the loupe window (A) to move the magnified part.
zTo hide the loupe window, click the Hide button (B).
Alternatively you can click any part out of the loupe window, or press and hold
Alt
and right-click.
zTo change the loupe window size, drag the bottom-right corner (C).
The size range you can enlarge/shrink depends on the screen’s resolution.
NOTE
zIf you execute the scroll operation while the loupe window is displayed, the window directly below the loupe window
will scroll vertically. The loupe window will not be displayed during vertical scrolling. When vertical scrolling stops, the
loupe window will be displayed in the same position where it appeared before scrolling began.
zNot compatible with the horizontal scroll function in the Touch Pad utility. ( Î page 5)

Activating the Loupe Utility

Using the Loupe Utility