116
Troubleshooting (Advanced)

The cursor cannot be controlled properly

zSensitivity when touching the Touch Pad can be adjusted. (Î page 11)
zMake sure [Touch Pad] is set to [Enabled] on the [Main] menu of the Setup Utility. (Î page 99)
zWith the following procedure, check that no external mouse driver is installed. If it is installed, it may not possible to use
the Touch Pad.
AClick [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
BDouble-click [Mice and other pointing devices].
If a name other than [Synaptics PS/2...] is displayed, then an external mouse driver is installed. Delete it, then
restart the computer.
zRestart the computer by using the keyboard.
Press ,
U
, and select [Restart] with Î Í Ï Ð, then press
Enter
.
If the computer does not respond to keyboard commands, read No response”. (Î page 114)
<Only for CF-T8 Series with Windows XP Tablet PC Edition>
zClick [start] - [Control Panel] - [Add or Remove Programs], and check that [FCL USB Pen Tablet] is displayed.
If it is not displayed:
It is necessary to install the touchscreen driver.
Click [start] - [Run], and input “c:\util\drivers\tscreen\TPSetUp.exe”, then click [OK].
Follow the on-screen instructions to complete installation.

The cursor moves randomly

zAdjust the touch sensitivity.
To adjust the sensitivity, refer to “Adjusting the Sensitivity when Touching the Touch Pad” (Î page 11).
zCheck that no external mouse driver is installed. (Refer to steps A and B under “The cursor cannot be controlled prop-
erly” above.)
z<Only for CF-T8 Series>
Do not press the area around the display. The cursor may move to the edges of the screen.
Problems with Cursor