88
Disabling/Enabling Wireless Communication

To check the wireless communication status

1Place the cursor over the Wireless Switch Utility icon ( or ) on the notification
area.
NOTE
zDo not turn on/off the switch repeatedly at too short intervals.
zDo not restart, log off, or enter standby or hibernation immediately after turning on/off the switch.
zDo not turn on/off the switch while Windows is starting up.
zTo use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled]
(default) in the [Advanced] menu of the Setup Utility.
zIt may take some time to turn off wireless communication after switching the wireless switch off.
zIf the IEEE802.11a setting is changed in [Device Manager], the display will be changed accordingly.
You can automatically disable the wireless LAN connection when a LAN cable is connected to your computer. You need to
install the Wireless Connection Disable Utility to use this function.

Installing the utility

1Log on to Windows as an administrator.
2Click [start] - [Run] and input [c:\util\wdisable\setup.exe], and click [OK].
3Follow the on-screen instructions to install the Wireless Connection Disable Utility.

Checking the status of the Wireless Connection

NOTE
zThe Wireless Switch Utility should also be installed so that the Wireless Connection Disable Utility works.
zThe utility does not automatically disable the Bluetooth connection.
Wireless Connection Disable Utility