Panasonic CQ-C800U General, On/offPower Powerpwr Power off, Power on, Removing, Mounting

General

This chapter explains how to turn on or off the power, how to adjust the volume, etc.

Power on

Press [SOURCE] (PWR: POWER).

On/offPower POWER)(PWR: Power off

Hold down [SOURCE] (PWR: POWER) until you hear a beep, then release it.

You can remove the face plate to prevent it from being stolen.

		Removing
		1 Turn off the power (a page 14)
Removing/MountingPlate	SYSTEM)THEFT-(ANTI	2 Press [	]
		(Release).
		(The face plate disen-		CQ-C800U
		gages with a click
		when it is removed.)		BAND DISP	OPEN
				/ /SET/APM	TILT
		The face plate automatically closes after a lapse of 5
		seconds while it is open.
		The power is automatically turned off while the unit
		is active.
		3 Put the face
		plate in the case.
Face

Cautions

¡It is recommended to remove or mount the face plate when the plate is at the closed position. Do not remove or mount the face plate when the plate is in motion.

¡This face plate is not waterproof. Do not expose it to water or excessive moisture.

¡Do not remove the face plate while driving your car.

USH	SEL /	SRS		SOURCE	CQ-C800U
			W		PWR
LP
O			O
V			W	SQ
				MENU
					DIM
				TUNE
				TRACK
				FOLDER /P-SET/DISC	/ /SET/APM		TILT
MUTE	D・M				BAND	DISP	OPEN
SBC-SW				LIST

Mounting

1 Slide the left side of the face plate in place.

2 Press the right end of the face plate until “click” is heard.

¡Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.

¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.

¡If dirt or other foreign substances get on the con- tacts, wipe them off with clean and dry cloth.

¡To avoid damaging the face plate, do not push it

down or place objects on it while it is open.

14CQ-C800U