Panasonic CQ-C800U operating instructions Operation Flow, Track selection, Pause

CD Player

Cautions

¡This unit does not support 8 cm (3”) discs.

¡Do not use irregularly shaped discs. (a page 38)

¡Do not use discs that have a seal or label attached.

¡To avoid damaging the face plate, do not push it down or place objects on it while it is open.

¡Do not pinch your finger or hand in the face plate when the face plate is in motion.

¡Do not insert foreign matter into the disc slots.

When a disc is already loaded, press [SOURCE] to select the CD mode.

¡Refer to the section on “Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)” (a page 38).

¡This unit does not support a MIX mode CD (a CD containing both CD-DA and compressed audio data). In case of using such a CD, problems may occur such as anacoustic play- back.

1 Press [uOPEN] to open the face plate.

LPUSH VO

S

EL

/

SRSW OW

CQ-C800U

SOURCE PWR

SQ

MENU

DIM

Operation Flow

When a disc is already loaded ( lights), the

disc will automatically be ejected.

2 Load a disc with the printed side facing up.

The face plate closes automatically, and the unit rec- ognizes the disc and starts playing automatically, too.

Printed side

TUNE

TRACK

	FOLDER /P-SET/DISC	/ /SET/APM		TILT
MUTE	D・M	BAND	DISP	OPEN
SBC-SW
	LIST

3 Select a desired portion.

Track selection

[7] (TRACK): Next track

[6] (TRACK): Preceding track (press twice)

Note: Hold down for fast forward/reverse.

Pause

Press [BAND] (h/ 5).

Press again to cancel.

4 Press [uOPEN] to eject the disc.

Note: The panel automatically closes after 20 sec- onds.

CD Mode Display

Track number

CD-TEXT display

Notes:

¡For scrolling text, hold down [DISP: DISPLAY] for 2 sec. or more.

¡“NO TEXT” is displayed when there is no information on the disc.

Play Mode indicators

Lights when each mode is activated.

Time

Lights when the disc is loaded.

22CQ-C800U