Troubleshooting

If You Suspect Something Wrong

Check and take steps as described below.

If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Servicenter. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking.

Never take measures especially for those other than indicated by ital- ic letters in “Possible Solution” described below because those are too dangerous for users to handle themselves.

Warning

¡Do not use the unit in an irregular condition, for example, without sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealer.

¡Never try to repair the unit by yourself because it is dangerous to do so.

Troubleshooting English

Common

Problem

No power to the

unit

Sound is not

generated.

Noise

Noise is made in step with engine revolutions.

Possible cause a Possible solution

The power cord (battery, power and ground) is connected in the wrong way.

aCheck the wiring.

Fuse blows out.

aEliminate the cause of fuse blowout and replace the fuse with new one. Consult your dealer.

MUTE is set to ON.

aSet MUTE to OFF.

The wiring of speaker lines are not correct, or a break or poor contact arises.

aCheck the wiring in accordance with the wiring diagram. (Installation Instructions)

There is an electromagnetic-wave generator such as a cellular phone near the unit or its electrical lines.

aKeep an electromagnetic-wave generator such as a cellular phone away from the unit and the wiring of the unit. In case that noise cannot be eliminated due to the wiring harness of the car, consult your dealer.

The contact of the ground lead is poor.

aMake sure that the ground lead is connected to an unpainted part of the chas- sis securely.

Alternator noise comes from the car.

aChange the wiring position of the ground lead.

aMount a noise filter on the power supply.

Customize the Display (Customize Function),

CQ-C800U33

Page 33
Image 33
Panasonic CQ-C800U Troubleshooting, If You Suspect Something Wrong, Problem No power to Unit Sound is not Generated Noise