55
CQ-CB8901U
Specifications

Installation, Specifications

Notes:
¡Specifications and design are subject to modification without notice due to improvements.
¡Some figures and illustrations in this manual may be different from your product.
General
Sampling Frequency 8 times oversampling
DA Converter 4 DAC System
Pick-Up Type Astigma 3-beam
Light Source Semiconductor laser
Wavelength 790 nm
Frequency Response 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio 96 dB
Total Harmonic Distortion
0.01 % (1 kHz)
Wow and Flutter Below measurable limits
Channel Separation 86 dB

FM FM (HD Radio)

Frequency Range 87.9 MHz - 107.9 MHz Frequency Range 87.9 MHz - 107.9 MHz
Usable Sensitivity 12.2 dBf. (1.12µV, 75Ω)Usable Sensitivity
– 88 dBm (BER<1.0X10
-5)
50 dB quieting Sensitivity
15.2 dBf. (1.59µV, 75Ω)Signal to noise ratio 79 dB
Frequency Response 30 Hz - 15 kHz (±3 dB) Stereo Separation 76 dB
Alternate channel selectivity
75 dB Total harmonic distortion 0.08 % (1 kHz)
Stereo Separation 40 dB (at 1 kHz)
Image response ratio 75 dB
IF response ratio 100 dB
Signal to noise ratio 62 dB

AM AM (HD Radio)

Frequency Range 530 kHz - 1 710 kHz Frequency Range 530 kHz - 1 710 kHz
Usable Sensitivity 25 dB/µV (S/N 20 dB) Usable Sensitivity
21 dB/µV (BER<1.0X10
-5)
Signal to noise ratio 77 dB
Stereo Separation 74 dB
Total harmonic distortion 0.08 % (1 kHz)

CD PlayerRadio

Power Supply DC 12 V (11 V - 16 V), Test Voltage 14.4 V, Negative Ground
Tone Controls (Bass/Treble)
Bass; ±12 dB at 62 Hz, Treble; ±12 dB at 16 kHz
Equalizer Center Frequency
60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz)
Variable Range of Equalizer
-
12 dB to 12 dB (2 dB step)
Current Consumption Less than 2.2 A (CD mode, 0.5 W 4-Speaker)
Maximum Power Output
50 W x 4 (at 1 kHz)
Speaker Impedance 4 - 8 Ω
Pre-amp output voltage
5 V
Subwoofer-output voltage
5 V
Pre-amp output impedance
60 Ω
Subwoofer-output impedance
60 Ω
Dimensions (Main Unit)
178(W) x 50(H) x 155(D) mm {7”x 1 15/16
”x 6 1/8
”}
Weight (Main Unit) 1.7 kg {3 lbs. 12 oz}
Above Specifications comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4 Ωand ≤1%
THD+N
Signal to Noise Ratio:
78 dBA (reference: 1 W into 4 Ω)
54
Installation
CQ-CB8901U