CQ-CB8901U
Customize the Display (Customize Function)
You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from
the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software,
IMAGE STUDIO. See “Notes on Customize function” (apage 38) as well.
Note:Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.

CUSTOMIZE Menu Display

36
Display Setting
Adjustment to display on the DISPLAY menu
CQ-CB8901U 37

Display Setting, Customize the Display (Customize Function)

Preparation:
Put the CD-R/RW that contains data to
be customized in hand.
1If there is a disc inside, take out the
disc.
2Press [SRC]to
select the CD
mode.
3Hold down [SEL] for 4 sec. or more to
display the menu screen.
4Load a CD-R/RW that contains data.
Note:
¡It may take time for the unit to identify the CD-
R/RW.
¡Discs recorded by the packet writing software are
not supported.
5Select an item to be customized.
[}][{]:Select
[BAND](SET): Confirm
Note:To exit the customize menu, hold down
[SEL]4 sec. or more.
GRAPHIC PATTERN
Moving image (graphic pattern) data (apage 36)
STILL IMAGE
Still image data (apage 36)
OPENING MESSAGE
Moving image at power on (apage 14)
CLOSING MESSAGE
Moving image at power off (apage 14)
6Select a file.
[}][{][]][[]:Select
[BAND](SET): Confirm
Notes:
¡Files are automatically identified by their exten-
sions, and target files are displayed.
¡If “BACK”is selected, the screen of step 5
appears.
7For a moving image file or still image
file, select where to save the file.
[]][[]:Select
[BAND](SET): Confirm
Notes:
¡New data overwrites existing data.
¡If “BACK” is selected, the screen of step 6
appears.
8Confirm the changed item.
[]][[]:Select
[BAND](SET): Confirm
Customization is performed. Do not turn off the
power in mid-operation. (It takes approx. 8 minutes
to complete this operation for a 751 kB moving
image.) After completion of this operation, the
screen of step 5 appears.
Note:If “NO” is selected, the screen of step 5
appears.
9Hold down [SEL] 4 sec. or more.
The CD mode comes back. Press the [OPEN]but-
ton to eject the disc.

DISPLAY Menu Display

1Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)for 2
sec. or more.
2Press []]or [[]to display the DIS-
PLAY menu.
3Press [}]or [{]to select a function to
be adjusted.
4Press [BAND]
(SET) to confirm
the display.
5Adjust the setting value.
6Press [BAND] (SET).
7Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.