Panasonic CQ-RX100U Radio AM/FM, Operation Flow, Radio Source, Display, Station Preset, Band

Radio (AM/FM)

[SRC] (Source) selects a source.

[DISP] (Display)

switches the information on the display.

[BAND]

selects a band in the radio source. [APM] (Auto Preset Memory) executes APM in the radio source. (Hold it down for more than 2 seconds.)

[TUNE ] [TUNE ]

down/up the frequency. (Hold it down for more than 0.5 seconds and release it for seek tuning.)

Preset buttons [1] to [6]

selects a preset station in the radio source,

and presets the current station. (Hold it down for more than 2 seconds.)

Operation Flow
Radio Source	Display

1 Press [SRC] to select the radio source.	Frequency Adjustment
	[TUNE ]: Lower
2 Press [BAND] to select a band.
	[TUNE ]: Higher
	Note: Hold down for 0.5 sec. or more and release for

station search.

3 Select a station.				Preset Station Selection
				Press the corresponding preset button from
				[1] to [6] to tune in a preset station.
	Band	Frequency	Preset Number	Display Change
				Press [DISP] to change the display.
					Radio mode display
					(Default)
					Clock display
lights while receiving an FM stereo signal.

Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.

Preset stations can be simply called up by pressing [1] to [6].

Station Preset

Auto Preset Memory (APM)

With this operation, stations with good receiving conditions can be automatically stored in the preset memory.

1 Select a band.

2 Hold down [BAND] (APM) for more than

2 seconds.

The preset stations under best receiving conditions are received for 5 seconds each after presetting the stations (SCAN). To stop scanning, press one of the buttons from [1] to [6].

Note: New stations overwrite existing saved stations.

Manual Station Preset

1 Tune into a station.

2 Hold down one of the preset buttons from

[1]to [6] for more than 2 seconds.

(blinks once)

Note: New stations overwrite existing saved stations.

- 15 -