Panasonic CQ-RX100U Function Settings, be adjusted, Demonstration, Mute/Attenuation, AUX1 Skip

Function Settings

[VOL]

selects a value in the function menu. (PUSH SEL) (Push to select) selects items in the function menu.

[DISP] (Display)

exits from the function menu.

1 Hold down [VOL] (PUSH SEL) for 2 sec. or more to open the function menu.

Note: If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode.

2 Press [VOL] (PUSH SEL) to select a mode to 3 Turn [VOL] clockwise or counterclockwise to
be adjusted.	adjust.

		Demonstration	: On (Default)
	\CQ-RX400U\ \CQ-RX200U\
	You can set up the monitor to display or hide the		: Off
	demonstration screen.
	Note: Button operation with either the main unit or
	remote control allows users to cancel the demonstration
	screen for 20 seconds and enable the selected operation
	even in the demo-on mode.
Menu		Mute/Attenuation	: Volume down
			by 10 steps
Function	You can select mute or attenuation.
			: Volume off
			(Default)
	\CQ-RX400U\ \CQ-RX200U\	AUX1 Skip	: On (Skip
			disabled.) (Default)
	If AUX1 is not used, the AUX1 mode is skipped when
	selecting the source.
			: Off (Skip
			enabled.)
	\CQ-RX100U\ \CQ-RX100L\	AUX Skip	: On (Skip
			disabled.) (Default)
	If AUX is not used, the AUX mode is skipped when
	selecting the source.
			: Off (Skip
			enabled.)

Notes:

•To return to the regular mode, press [DISP].

\CQ-RX400U\ \CQ-RX200U\

•The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information, refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.

- 17 -