English
Please refer to the illustration to the right for how the colors relate to each other.
For example, if you select Red and set its range at 0, only pure red in the projected picture will be selected. Increasing its range will include red close to yellow and red close to magenta.
5.Press 
to highlight Saturation and adjust its values to your preference by pressing 
/ 
. Every adjustment made will reflect to the image immediately.
For example, if you select Red and set its value at 0, only the saturation of pure red will be affected.
6.Press 
to highlight Gain and adjust its values to your preference by pressing 
/ 
. This will affect the contrast level of the selected primary color. Every adjustment made will be reflected to the image immediately.
7.Repeat steps 3 to 6 for other color adjustments.
8.Make sure you have carried out all of the desired adjustments.
9.Press MENU/EXIT to exit and save the settings.
REDYellow GREEN
MagentaCyan
BLUE
Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations.
The Presentation Timer is only available when the input signal is a PC or notebook with
Follow these steps to utilize this function:
1.Press TIMER SETUP on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press ENTER to display the Presentation Timer page.
2.Highlight Timer Period and decide the time period by pressing
/ 
. The length of time can be set from 1 to 5 minutes in 1- minute increments and 5 to 240 minutes in
Presentation Timer
Timer Period | 15 |
|
|
|
|
|
| ||
Timer Display |
| Always |
| |
Timer Position |
| |||
Timer Counting Direction | Count Down | |||
Timer Audible Reminder |
|
| Off | |
On | Off | |||
|
|
| MENU Back | |
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3.Press 
to highlight Timer Display and choose if you want the timer to show up on the screen by pressing
/ 
.
Selection | Description |
Always | Displays the timer on screen throughout the presentation time. |
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s). | |
Never | Hides the timer throughout the presentation time. |
4. | Press | to highlight Timer Position and set the timer position | 5 min | 5 min | |
| by pressing | / . | |||
|
|
| |||
|
|
|
| 5 min | 5 min |
34 Operation
