BenQ SP920P user manual Controls and functions, Projector

Controls and functions

Projector

1
2
3	7
	8
4	9
	10
5	11
	12
6	13
	14

1.Focus ring

Adjusts the focus of the projected picture. See "Fine-tuning the image size and clarity" on page 28 for details.

2.Zoom ring

Adjusts the size of the projected picture. See "Fine- tuning the image size and clarity" on page 28 for details.

3.POWER indicator light

Lights up or flashes when the projector is under operation. See "Indicators" on page 50 for details.

4.II Power

Toggles the projector between standby mode and on. See "Starting up the projector" on page 23 and "Shutting down the projector" on page 40 for details.

5.MENU/EXIT

Turns on the On-Screen Display (OSD) menu. When the OSD menu is activated, exits and saves the menu settings. See "Using the On-Screen Display (OSD) menus" on page 24 for details.

6.BLANK

Used to hide the screen picture. See "Hiding the image" on page 36 for details.

7.TEMPerature indicator light

Lights up if the projector's temperature becomes too high. See "Indicators" on page 50 for details.

8.LAMP indicator light

Indicates the status of the lamp. Lights up when the lamp has developed a problem. See "Indicators" on page 50 for details.

9.MODE

Depending upon which input signal is selected, selects an available picture setup mode. See "Selecting a picture mode" on page 31 for details.

10.ASPECT

Selects the display aspect ratio. See "Selecting the aspect ratio" on page 30 for details.

11.AUTO

Automatically determines the best picture timings for the displayed picture. See "Auto-adjusting the image" on page 28 for details.

12.Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 29 for details.

Left/

Starts the FAQ function. See "Utilizing FAQ function" on page 36 for details.

Right/

Locks the keys on the projector. See "Locking control keys" on page 37 for details.

When the On-Screen Display (OSD) menu is activated, the arrow keys are used as directional arrows to select the desired menu items and to make adjustments. See "Using the On-Screen Display (OSD) menus" on page 24 for details.

13.SOURCE

Displays the source selection bar. See "Switching input signal" on page 27 for details.

14.ENTER

Enacts the selected On-Screen Display (OSD) menu item. See "Using the On-Screen Display (OSD) menus" on page 24 for details.

English

Introduction 9