English
Shutting down the projector
1.Press II Power and a confirmation message displays prompting you.
If you don't respond in a few seconds, the message will disappear.
If you want to cancel the message, press any key except PAGE 
/
and LASER on the remote control.
Do not look into the laser light window or shine the laser light beam on yourself or others. See the warning messages on the back of the remote control prior to using it.
2. Press II Power a second time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector.
3.Once the cooling process finishes, a "Power Off Ring Tone" will be heard. The POWER indicator light is a steady orange and fans stop.
4.Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time.
•To protect the lamp, the projector will not respond to any commands during the cooling process.
•To shorten the cooling time, you can also activate the Quick cooling function. See "Quick Cooling" on page 44 for details.
•To turn off the power ring tone, see "Turning off the Power on/off ring tone" on page 38 for details.
If the projector is not properly shut down, to protect the lamp, when you attempt to
40 Operation
