Audio Settings
[VOL]
selects a value in the audio menu. (PUSH SEL) (Push to select) selects items in the audio menu.
[DISP] (Display)
exits from the audio menu.
1 Press [VOL] (PUSH SEL) to open the audio menu.
Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 seconds in the SQ adjustment), the display returns to the regular mode.
2 Press [VOL] (PUSH SEL) to select a | 3 Turn [VOL] clockwise or counterclockwise to |
mode to be adjusted. | adjust. |
|
| Volume |
|
|
| (Setting Range: 0 to 40, Default: 18) | : Up | ||
|
|
| : Down | |
|
| Bass |
|
|
| (Setting Range: | : Increased | ||
|
|
| : Decreased | |
|
| Treble |
|
|
| (Setting Range: | : Increased | ||
Menu |
|
| : Decreased | |
| SQ Adjustment |
|
| |
|
|
|
| |
Audio | (Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB)) | / | : center frequency up/down | |
SQ Mid: | ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz) | [ ] []: Band selection | ||
| Setting range: |
| ||
| SQ Low/Bass: | ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz) | [] []: Level up/down | |
| SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz) |
|
| |
|
| Balance |
|
|
| (Setting Range: 15 levels each, Default: CNT (center)) | : Right enhanced | ||
|
|
| : Left enhanced | |
|
| Fader |
|
|
| (Setting Range: 15 levels each, Default: CNT (center)) | : Front enhanced | ||
|
|
| : Rear enhanced | |
Notes:
•The volume can also be adjusted directly using [VOL] on the main unit. (« “General”)
•For further information on SQ (Sound Quality) settings, refer to “Sound Control”.
•Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.
•The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information,
refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.
• If the fader is set to front, the
- 16 -
