HP Easytime/XL Tasks
Files
A dialog box may prompt you for more information.
Supply any requested information and press F5 OK to continue.
During the store process, HP Easytime/XL displays a monitoring screen where you can check the progress of the task. Do this by pressing F5 Update Display periodically. During the store process, you cannot use this terminal for anything else.
If the store is progressing correctly, the monitoring screen displays the percent complete, for example:
STORE OPERATION IS 25% COMPLETE.
When the store is finished, the following message is displayed:
Store finished successfully. See report ETSTLST.
6. Press F8 Close to close the monitoring screen.
Stopping the Store Process
1.Press F7 Stop.
2.Press F5 Yes to confirm.
3.Press F8 Close to close the monitoring screen and go back to File Management.
It can take several minutes for the store process to stop.
Verifying Files Stored
HP Easytime/XL creates a print file listing every file stored, and every file the system was not able to store. Check this report to verify that all files have been successfully stored on tape.
The name of the report file is ETSTLST. You can view and read the contents of this file on the Print File Management screen. This file can be quite large and so the status is ON HOLD. Take the file off hold if you want to print it.
Setting Store Options
Special store options can be set that apply when storing files. If you are the system administrator you can save these options permanently.
1.Press F2 O to open the Options menu.
2.Press S for Set Store Options.
A dialog box prompts you to choose store options.
3.Enter a file name, group, and account to save the store report in a file. If the file does not exist, HP Easytime/XL creates it for you.
4.Choose one of the available options.
Chapter 3 | 47 |
