HP Easytime/XL Reference
Requests and Messages
Responding to Messages
Monitor messages to keep informed about activity on the system, for example, users or jobs logging on and off, disk storage, or other resource usage. Some messages are caused by an error and require a corrective action.
This section provides a list of system messages. When the message is caused by an error, possible causes for the error, and suggestions for recovery, are also included.
MESSAGE: IS NOT WRITE ENABLED. device (ldev n)
CAUSE: This message occurs during a backup, or when storing or restoring files. It indicates that the tape is not write enabled.
ACTION: Enable the tape for writing.
MESSAGE: MUST BE ONLINE BEFORE REPLYING. device (ldev n)
CAUSE: This message occurs if the tape drive is not online during a backup, or when storing or restoring files.
ACTION: Set the tape drive online.
MESSAGE: NOT READY. device (ldev n)
CAUSE: This message occurs when there is a problem with a printer or tape drive.
ACTION: Check the device to make sure that it is plugged in, powered on, and online. If the device is a printer, check for a paper jam and that it is not out of paper.
MESSAGE: FORMS ON device (ldev n): forms message.
CAUSE: This message occurs when a print file requires a form.
ACTION: Check the Print File Management screen for the kind of form required and perform the task Load Form.
MESSAGE: LOGOFF ON. device (ldev n)
CAUSE: User or job indicated has logged off this device.
ACTION: No action required.
MESSAGE: LOGON FOR: user,group.account ON device (ldev n)
CAUSE: User or job indicated has logged on to this device.
ACTION: Load the next tape in the tape drive.
MESSAGE: LOAD MEDIA media n FOR RESTORE ON. device (ldev n)
CAUSE: This message occurs when restoring files from tape. Indicates that the end of the tape has been reached.
ACTION: Load the next tape in the tape drive.
88 | Chapter 4 |
