About the Controls on the Air Conditioner
Controls
2 |
4 5
OPERATION
•To turn the air conditioner ON, push the OFF/ON button.
To turn the air conditioner OFF, push the button again.
•This button takes priority over any other buttons.
•When you first turn it on, the air conditioner is on the High cool mode and the temperature is set at 72°F (22°C)
MODE
•Every time you push this button, it will toggle between COOL, ECONOMY, FAN and DRY.
ON/OFF TIMER
•Every time you push the TIMER button, timer is set as follows. (1Hour → 2Hours → 3Hours
→ 4Hours → 5Hours 6Hours → 7Hours → 8Hours → 9Hours → 10Hours 11Hours → 12Hours → 0Hour)
•The Setting Temperature will be raised by 2°F (1˚C) 30 min. later and by 2°F (1˚C) after another 30 min.
FAN SPEED
•Every time you push this button it is set as follows. {High(F3) → Low(F1) → Med(F2) → High(F3)...}.
3
7
1
6
TEMPERATURE SETTING
•This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F to 86°F by 2°F.(16˚C to 30˚C by 1˚C) Select a lower number for a lower temperature in the room.
AIR SWING
•This button can automatically control the air flow direction.
REMOTE CONTROL SIGNAL RECEIVER
DRY
•When this unit is in dry mode, the fan rotates in low speed. The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and the unit checks the room air temperature to set itself.
About the Controls on the Air Conditioner
5
