Installation Kits Contents
1 | 2 | 3 | 4 |
|
5 | 6 | 7 | 8 | 10 |
9 |
|
|
|
|
11 |
|
|
|
|
NO. | NAME OF PARTS | Q'TY |
1 | FRAME CURTAIN | 2 |
2 | SILL SUPPORT | 2 |
3 | BOLT | 2 |
4 | NUT | 2 |
5 | SCREW(TYPE A) (10mm (25/64")) | 13 |
6 | SCREW(TYPE B)D5.1mm (3/16")/16mm (5/8") | 3 |
7 | SCREW(TYPE C) D4.1mm (5/32")/16mm (5/8") | 5 |
8 | 1 | |
9 | WINDOW LOCKING BRACKET | 1 |
10 | 1 | |
11 | DRAIN PIPE | 1 |
Suggested Tool Requirements
SCREWDRIVER(+,
PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet at both sides and at the back.
2. Slide the unit from the cabinet by gripping the base pan handle and pulling while bracing the cabinet.
3. Cut the window sash seal to the proper length.
Peel off the backing and attach the
to the underside of the window sash.
4. Insert the Frame Curtain 
into the upper guide.
5.Fasten the curtains to the unit with 4 Type A screws.
10
(Type A)
5
5
Shipping
Screws
Lower guide
Features and Installation
5
(Type A)
11
