Panasonic CW-XC105HU, CW-XC125HU operating instructions Remote controller, Economy

Remote controller

Precaution: The Remote Controller will not function properly if strong light strikes the sensor window of the air conditioner or if there are obstacles between the Remote Controller and the air conditioner.

About the Controls on the Air Conditioner

1	OPERATION
	TEMP
	5
TIMER	AIR
	SWING
3	7
MODE	FAN SPEED
2	4

ECONOMY

6

OPERATION

•To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.

•This button takes priority over any other buttons.

•When you first turn it on, the air conditioner is on the High cool mode and the temperature is set at 72°F(22˚C).

MODE

•Every time you push this botton, it will toggle between COOL, ECONOMY, FAN and DRY.

ON/OFF TIMER

- STOPPING OPERATION

•Every time you push this button, when the air conditioner is operating, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours → 6Hours → 7Hours → 8Hours → 9Hours → 10Hours → 11Hours → 12Hours → O).

•The Setting Temperature will be raised by

2°F (1°C) 30 min. later and by 2°F (1°C) after another 30 min.

- STARTING OPERATION

•Every time you push this button, when the air conditioner is not operating, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours → 6Hours → 7Hours → 8Hours → 9Hours → 10Hours → 11Hours → 12Hours → O)

FAN SPEED

•Every time you push this button it is set as follows. {High(F3) → Low(F1) → Med(F2) → High(F3)...}.

TEMPERATURE SETTING

•This button can automatically control the temperature of the room.

The temperature can be set within a range of 60°F to 86°F by 2°F.(16˚C to 30˚C by 1˚C) Select a lower number for a lower temperature in the room.

ECONOMY

•If you push the button, the fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.

AIR SWING

•This button can automatically control the air flow direction.

6