Panasonic CY-BT100U operating instructions Advanced Operation, Disconnection, Reconnection

Advanced Operation

English

❑Calling back

A call-back call can be made.

However, the callback function is disabled after disconnecting Bluetooth communication. (e.g. communication disconnection between the Bluetooth unit and mobile phone, and communica- tion disconnection by turning off the power of the Head unit)

Step 1

Press the [Hang-on]after a call comes in.

Step 2

Confirm the telephone number on the Head unit.

Step 3

Press the [Hang-on]to make a call.

(Press [Hang-up]to activate cancellation.)

Note: Some mobile phones cannot display the telephone num- ber of an incoming call or call back.

❑Rejection of incoming calls

Press the [Hang-up]to reject an incoming call.

❑Disconnection of Bluetooth

You can disconnect Bluetooth temporarily.

Disconnection

Press and hold the [Hang-up]. for more than 2 seconds until the indicator putting out (approximately 2 seconds ) to reject call on this unit.

Reconnection

Press [Hang-on]. The LED turns from blinking to perma- nent.

Note: You cannot disconnect Bluetooth in the talking state but end a call.

21