Panasonic DMCFX580S Double-click on Removable Disk in My Computer, Double-click Dcim folder

Connecting to other equipment

Double-click on [Removable Disk] in [My Computer].

•When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.)

Double-click [DCIM] folder.

Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.

∫Disconnecting the USB connection cable safely

•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.

Note

•This unit cannot be stood upright when the AC adaptor is connected. When placing it down and operating, we recommend placing it on a soft cloth.

•Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; optional).

•Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed.

∫Viewing the contents of the built-in memory or card using the PC (folder composition)

Built-in memory							1	Folder number
	DCIM
Card
				100_PANA			2	File number
								JPG:	Pictures
							3
								MOV:	Motion pictures
		100_PANA
			P1000001.JPG				MISC:		DPOF print
						 			Favorite
			P1000002.JPG

P1000999.JPG

101_PANA

999_PANA

MISC

A new folder is created when pictures are taken in the following situations.

•After [NO.RESET] (P26) in the [SETUP] menu has been executed

•When a card containing a folder with the same folder number has been inserted (Such as when pictures were taken using another make of camera)

•When there is a picture with file number 999 inside the folder

VQT1Y62 105