VQT1Y62
46
Advanced (Recording pictures)
–When the camera has determined that there is little jitter when the optical image stabilizer is
set to [MODE1], [MODE2] or [AUTO].
•In Intelligent Auto Mode, shutter speed changes depending on the identified scene.
•T here will be differences in the above shutter speeds in the Scene Modes.
Note
•If you bring the flash too close to an object, the object may become distorted or discolored by
the heat or light from the flash.
•When you take a picture beyond the available flash range, the exposure may not be adjusted
properly and the picture may become to light or too dark.
•When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
when you press the shutter button fully. When [AUTO LCD OFF] is set, the LCD monitor
turns off and the status indicator lights.
•The white balance may not be properly adjusted if the flash level is insufficient for the subject.
•When the shutter speed is fast, the flash effect may not be sufficient.
•It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
•The red-eye reduction effect differs between people. If the subject was far away from the
camera or was not looking at the first flash, the effect may not be evident.

[REC] mode: ³±´²n

Taking Close-up Pictures

This mode allows you to take close-up pictures of a subject, e.g. when taking pictures of

flowers. You can take pictures of a subject as close as 5 cm (0.17 feet) from the lens by

rotating the zoom lever upmost to Wide (1k). (AF Macro Mode)

You can take a picture with the digital zoom up to 3k while maintaining the distance to the

subject for the extreme Wide position [5 cm (0.17 feet)]. (Macro Zoom Mode)

Press 4 [#].

Touch the item.
•
You can also press the shutter button halfway to finish.
• The menu screen disappears after about 5 seconds.
At this time, the selected item is automatically set.

Press the shutter button halfway to focus

and then press it fully to take the picture.
AFocus range
• [ ] is displayed during AF Macro Mode and [ ]
is displayed during Macro Zoom Mode.
• To cancel, select the [OFF] in step 2.
•
Zoom range, focus range, and zoom magnification are
displayed during zooming. Zoom range will be displ ayed in
blue (digital zoom range) during Macro Zoom Mode.
A
DMC-FX580PPC_mst.book 46 ページ ２００９年１月１５日　木曜日　午後５時４７分