Panasonic DMC-FZ20PP Setting Date/Time Clock Set, Select CLOCK SET from the, SETUP menu. P24

Preparation

Setting Date/Time (Clock Set)

∫Initial setting

The clock is not set when the camera is shipped. When you turn the camera on, the following screen appears.

PLEASE SET THE CLOCK

CLOCK SET MENU

•When pressing the [MENU] button, the screen shown in step 2 appears.

•The screen disappears in about 5 seconds. Start from step 1.

1 Select [CLOCK SET] from the
[SETUP] menu. (P24)
	SETUP 2/4
BEEP
SHUTTER
VOLUME	LEVEL 3
CLOCK SET
NO.RESET
SELECT	EXIT MENU
MENU

2 Set date and time.

CLOCK SET

10 : 00 DEC.11 . 2004

M/D/Y

SELECT SET EXIT MENU

•2/1: Select the desired item.

•3/4: Set date and time.

3 Select [M/D/Y], [D/M/Y] or [Y/M/D].

CLOCK SET

10:001DEC.11.2004

M/D/Y

SELECT SET EXIT MENU

•Close the menu by pressing the [MENU] button 2 times after finishing the setting.

•Check if the clock setting is correct, after turning the camera off and on.

22