Preparation
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting.
The lens hood cuts off excess lighting and improves the picture quality.
•Check that the camera is turned off and that the lens is retracted.
•Close the flash.
1 1 Adjust A on the lens hood
adaptor to [UNLOCK].
2Place the camera upside down. Align [UNLOCK] to B on the camera and then attach the lens hood adaptor to the camera.
[UNLOCK]
2 Rotate the ring C to the direction of the arrow until [LOCK] is adjusted to A on the adaptor.
[LOCK]
• Rotate the ring until it clicks.
3 1 Place the camera right side up. Adjust D on the lens hood to
Eon the lens hood adaptor. 2 Rotate the lens hood from E to
F.
20