
Preparation
Setting Date/Time (Clock Set)
∫Initial setting
The clock is not set when the camera is shipped. When you turn the camera on, the following screen appears.
PLEASE SET THE CLOCK
CLOCK SET MENU
2 Set date and time.
CLOCK SET
10 : 00 DEC.11 . 2004
M/D/Y
SELECT SET
EXIT MENU
•When pressing the [MENU] button, the screen shown in step 2 appears.
•The screen disappears in about 5 seconds. Start from step 1.
1 Select [CLOCK SET] from the [SETUP] menu. (P24)
SETUP 2/3
SHUTTER |
|
VOLUME | LEVEL3 |
CLOCK SET
NO.RESET
RESET
SELECT EXIT MENU
MENU
•2/1: Select the desired item.
•3/4: Set date and time.
3 Select [M/D/Y], [D/M/Y] or [Y/M/D].
CLOCK SET
10:001DEC.11.2004
M/D/Y
SELECT SET
EXIT MENU
•Close the menu by pressing the [MENU] button 2 times after finishing the setting.
•Check if the clock setting is correct, after turning the camera off and on.
22