Recording pictures (basic)
Taking Pictures using Burst Mode
1 Switch the burst mode setting to record pictures.
2016
19
: High speed
;
: Low speed
;
: No limit
;
No display (canceled)
∫Number of pictures recorded in burst mode
| Burst speed | Number of recordable | |
| (pictures/ | pictures (pictures) | |
| second)¢ |
|
|
|
| ||
|
|
|
|
| 4 | max. 7 | max. 13 |
|
|
|
|
| 2 | max. 7 | max. 13 |
|
|
|
|
|
| Depends on | Depends on |
| 2 | the card | the card |
|
| capacity | capacity |
|
|
|
|
¢When the shutter speed is higher than 1/60 and the flash is not activated
•In simple mode [], the burst speed is fixed to Low. (P36)
•Keep pressing the shutter button fully to activate the burst mode.
•If the flash is activated, you can record only 1 picture.
•When the
•You cannot take pictures with audio in the burst mode.
•You cannot take pictures in the burst mode when the quality is set to [TIFF].
•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed by default.
•When the burst mode setting is set to no limit, the speed of taking pictures becomes slow during a recording in burst mode.
•Burst mode will not perform as described if a MultiMediaCard is used in place of an SD Memory Card. The reading/writing speed of a MultiMediaCard is slower than that of an SD Memory Card.
47