Panasonic DMCFZ7K, DMC-FZ7, DMCFZ7S 101, Press 4 to select PictBridge PTP and then press MENU/ SET

Connecting to other equipment

•Connect the USB connection cable with the [ ] mark facing the [1] mark on the [DIGITAL] socket.

•Hold the USB connection cable at C and insert straight in or take straight out.

3 Press 4 to select [PictBridge (PTP)] and then press [MENU/ SET].

USB MODE

PLEASE SELECT

THE USB MODE

PC

PictBridge(PTP)

MENU

SELECT SET MENU SET

•If you set [USB MODE] in the [SETUP] menu to [PictBridge (PTP)] in advance, it is not necessary to set this every time you connect to a PC. (P23)

•Do not use any other USB connection cables except the supplied one.

•To print the age in [BABY1]/[BABY2] (P64) in scene mode or the departure date for [TRAVEL DATE] (P66), use the software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied) and print from the PC. For information about this, refer to the separate operating instructions for PC connection.

•To find out more about PictBridge compliant printers, contact your local dealer.

∫Single picture

1 Press 3 to select [SINGLE PICTURE] and then press [MENU/SET].

PictBridge
SINGLE PICTURE
DPOF PICTURE
		MENU
SELECT	SET MENU	SET

2 Press 2/1 to select the picture and then press 4.

PictBridge 100_0001

1/3

PLEASE SELECT

THE PICTURE TO PRINT

SELECT
PRINT	EXIT MENU

•The message disappears in about 2 seconds.

3 Press 3 to select [PRINT START] and then press [MENU/SET].

SINGLE PICTURE
PRINT START
PRINT WITH DATE	１秒
NUM. OF PRINTS	1OFF
PAPER SIZE		MENU
PAGE LAYOUT
		SET
CANCEL SELECT	EXIT MENU

• Press [MENU/SET] to cancel printing.

4 Disconnect the USB connection cable after printing.

101

VQT0V63