Panasonic DMCFZ7S, DMC-FZ7, DMCFZ7K Scene Mode, Press 3/4 to select the scene mode, Prefocus

Models: DMC-FZ7 DMCFZ7K DMCFZ7S

1 132
Download 132 pages 5.21 Kb
Page 58
Image 58

Advanced

Prefocus

This is a technique for focusing in advance on the point the pictures will be taken when it is difficult to focus on the subject with auto focus due to its quick motion. [e.g. [PANNING] (P61) in scene mode]

This function is suitable when the distance between the camera and the subject is certain.

You can also record with manual focus in

motion picture mode [ ]. However the focus is fixed while recording motion

pictures.

If you focus on the subject in Wide and then rotate the zoom lever to Tele, the focus may not be adequate. In this case, focus on the subject again.

You cannot set continuous AF (P81) when manual focus is set.

The MF assistance screen does not appear when using the digital zoom.

The distance to the subject displayed on the screen in manual focus is an approximation of the focus position. Remember that the distance is an approximation when taking a picture.

Use the assistance screen for a final check of the focus.

After canceling power save mode, focus on the subject again.

58

Scene Mode

When you select a scene mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture.

• Refer to P59 to 65 for each scene menu.

1 Press 3/4 to select the scene mode.

 

SCENE MODE

1/5

SCN

PORTRAIT

 

 

SOFT SKIN

 

 

SCENERY

 

 

SPORTS

 

SELECT

SET MENU

 

SCENE MODE

2/5

SCN

NIGHT PORTRAIT

 

NIGHT SCENERY

 

PANNING

 

 

FOOD

 

SELECT

SET MENU

Press 4 at A to switch to the next menu screen.

If [SCENE MODE] menu does not appear, press [MENU/SET] to display the [SCENE MODE] menu.

When you press 1, explanations about each scene mode are displayed. (When you press 2, the screen returns to the [SCENE MODE] menu.)

2 Press [MENU/SET].

VQT0V63

Page 58
Image 58
Panasonic DMCFZ7S, DMC-FZ7, DMCFZ7K operating instructions Scene Mode, Press 3/4 to select the scene mode, Prefocus